Frequently Asked Questions
Page 7
Q: How is a “star” topology different from a “bus” topol-
ogy?
A: A “Star” topology requires that all cable runs terminate
at a central point such as a hub, bridge or
router.10BaseT Ethernet is the most common Ethernet
used with Appletalk. A “bus” or “daisy chain” topology
(such as a Localtalk network uses) connects several
devices in a row. It requires termination at the begin-
ning and end of the “bus” for proper communication to
occur.
Q: Can I use the Yellow Ethernet Cable to Connect the
AsantéTalk to a Switch, Hub, or Bridge?
A: No. The Yellow Ethernet cable that is supplied with the
AsantéTalk is a crossover cable and will not work when
connected to a port on a Switch, Hub, or Bridge.
Q: Can I use the Silver cable to connect my iMac to the
AsantéTalk?
A: No. The Silver cable is designed to connect the
AsantéTalk to a port on a Switch, Hub or Bridge. To
connect the AsantéTalk to an iMac, use the Yellow
cable which was provided with the AsantéTalk.
To Next Page
Loading...
