Ascaso Baby T User Manual

Enter to Programming
Software Baby T
Press the XL key and inmediately and without releasing this one
press also the L key to turn off the coffee group.
Press the XL key for 10 seconds to enter in the menú.
Then the display on the left group will show the differents
programming options.
With the S and L keys we increase/decrease the value of it, and with the XL key we
confirm the modification, returning to the programming menú.
To exit the programming menú, we must search for the “ESC” option and select it using
the XL key.
The keypads and displays will be off. To actívate again press the L key.
10’’
tc
Esc
UP
DOWN
CONFIRM
ANEXO SOFTWARE BABY T.indd 1ANEXO SOFTWARE BABY T.indd 1 09/09/2020 15:27:4809/09/2020 15:27:48

Ascaso Baby T Specifications

General

Type	Espresso Machine
Boiler Material	Stainless Steel
Pump Pressure	20 bar
Water Tank Capacity	2.5 liters
Manufacturer	Ascaso
Model	Baby T
Boiler Type	Thermoblock
Body Material	Stainless Steel
Voltage	230 V
Steam Wand	Yes
Pump Type	Vibratory

Summary

Enter to Programming

Turn off coffee group

Press XL and L keys simultaneously to turn off the coffee group.

Enter programming menu

Press XL key for 10 seconds to access the programming menu.

Navigate programming options

Use S/L to adjust values, XL to confirm and return to the menu.

Exit programming menu

Select the 'ESC' option using the XL key to exit the programming menu.

Deactivate and reactivate machine

Keypads/displays turn off; press L key to reactivate.

Parameters

Coffee Group Temperature (Tc)

Adjust the temperature of the coffee group.

Boiler Temperature (Ts)

Change the temperature of the steam boiler.

PID Parameters (Tec)

Configure PID control parameters. Advised not to change.

Steam Boiler Stand-by Temp (Tee)

Set steam boiler temp for energy saving during idle time.

Boiler Saving Mode Time (TiE)

Define time for boiler to enter saving mode and maintain temp.

Units of Measure (Ud)

Select units of measure: Celsius or Fahrenheit.

Other Programming Options

Coffee Preinfusion (P1-P4)

Program 'on' time for preinfusion. Max 5 seconds.

Chronometer Function (Cr)

Activate or deactivate display of coffee delivery time.

Offset Temperature (U)

Correct temperature difference between display and output group.

Steam Boiler Control (AC)

Activate and deactivate the steam boiler function.

Hydraulic Connection (EP)

Configure hydraulic connection as NETWORK or TANK.

Total Services Counter (ST)

Display total machine services.

Special Functions

Washing Process

Initiate 10 wash cycles by pressing XL and S keys when off.

Factory Reset

Perform factory reset using S, L, XL buttons and On switch.

Showroom Mode

Activate showroom mode by pressing S and L keys simultaneously when off.