To Next PageTo Next Page
Need help?Do you have a question about the Ascend JFD-23F and is the answer not in the manual?
General| Brand | Ascend |
|---|---|
| Model | JFD-23F |
| Category | Refrigerator |
| Language | English |
Details specific conditions and actions that are not covered by the manufacturer's warranty.
Outlines the procedure and requirements for obtaining authorized warranty repair services.
Provides recommendations for selecting an optimal and safe location for unit installation.
Specifies the necessary electrical connections and safety precautions for unit operation.
Step-by-step instructions with diagrams for correctly installing shelf brackets inside the unit.
Key warnings regarding electrical hazards, outlet usage, and unplugging procedures.
Safety precautions to observe during unit maintenance and cleaning operations.
Emphasizes the critical importance of proper electrical grounding for the unit.
Covers general safe operating practices, including tampering, door use, and storage.
Instructions for cleaning the condenser coil to ensure efficient operation and prevent damage.
Guidance on how to clean the fan blades and motor, protecting the motor from moisture.
Methods for cleaning the interior, door gaskets, shelves, and pilasters.
Instructions on how to view and adjust the desired temperature settings.
Procedures for initiating or stopping the defrost cycle manually.
How to display the evaporator temperature and the auto-resume function.
Explanation of the refrigerant and defrost indicator lights and their meanings.
Guide to entering parameter setup mode and modifying various control parameters.
Process for restoring all controller parameters to their original factory default settings.
Defines the lower and higher setpoint limits for refrigerator temperature control.
Configures temperature hysteresis, compressor start delay, and temperature offsets.
Sets the maximum defrost duration, interval time, and termination temperature.
Specifies the lower and higher setpoint limits for freezer temperature control.
Configures temperature hysteresis, compressor start delay, and temperature offsets.
Sets maximum defrost duration, interval time, and termination temperature for freezers.
Identifies causes like tripped breakers or thermostat settings for compressor failure.
Addresses causes for long run times, including product load, door seals, and coil cleanliness.
Diagnoses warm cabinet temperatures due to airflow, product, or thermostat settings.
Pinpoints causes of noise, such as loose parts or tubing vibration.
