30
S2 MAGNETIC SPINNING BIKE
SCREEN
Indicator /
Sound
Function Remark
Display
2.1.1. RPM The RPM range display shows the current average revolu-
tions per minute (RPM). As the RPM increases, a larger
indicator is lit to show the higher RPM range.
Gauge:
1-24, 25-49,
50-74,
75-99,
100-125.
2.1.2. TIME The TIME display field shows the time from start to finish
of the workout. The maximum time is 99 minutes and 59
seconds.
2.1.3. SPEED The SPEED display field shows the currently calculated
speed of the user. The maximum SPEED is 99.9 (km or m)/h.
2.1.4. KMI The KMI display the unit of distance. The default distance
unit is kilometers (KM). It can be switched to miles (MI)
2.1.5. DISTANCE The DISTANCE display field shows the distance from start
to finish of the workout. The maximum distance value is
9999.9.
2.1.6.
CALORIES
The CALORIES display field shows the estimated total
calories from start to finish of the workout. The maximum
calories value is 9999 Kcal.
2.1.7. PULSE The PULSE display shows the heart rate in beats per minute
(BPM) from a telemetric heart rate sensor. The PULSE range
is 40 - 240 BPM. This display value will be zero if a heart
rate signal is not detected.
2.1.8. Heart Rate
Monitor
The Heart Rate Monitor display shows by constantly flashing
which has the same frequency with the heart rate in beats
per minute (BPM) from a telemetric heart rate sensor. The
PULSE range is 40 - 240 BPM.
2.1.9. LEVEL The LEVEL display field shows the current resistance level.
The range of resistance is 1% - 100% which can be modified
by 1% increments by knob or APP.
2.1.10. POWER The POWER display shows the watts, showcasing the
number of watts from 0 - 999 watt. And a bar at the
bottom showcases the watts like a gauge getting filled the
more watts you work out.
To Next Page
Loading...