ASCOM 912T - U922 Programming Methods; Reprogramming via Radio or Rack; Important Parameters (Storage;Rack)

OPS basic 2006-06-26 Ascom Training/23
Programming the U922
 The receiver can be reprogrammed via radio or a storage/charging rack
 Via storage/charging rack
– Software application Pocket Unit Programmer (PUP) in WinBK is used
 Important parameters
– Transmitter frequency
– Prefix
– Call number
– Hot Key function
 Via radio
– The system identity and call number can be programmed via radio
– Set the pocket unit in program mode when programming it remote via radio from control
keyboard or 942PX