Need help?Do you have a question about the Aseko ASIN Aqua SALT and is the answer not in the manual?
General| Type | Salt Water Chlorinator |
|---|---|
| Control Panel | LCD Display |
| pH Control | Optional |
| Redox Control | Optional |
| Cell Type | Self-cleaning |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature | 10°C - 40°C |
| Salt Concentration | 3 - 5 kg/m3 |
Ensures operator has required skills for safe operation and maintenance.
Risks from probe failure or errors leading to uncontrolled chemical dosage.
Risk of toxic chlorine gas from mixing hypochlorite and pH minus in standing water.
Hazards from not observing informational text, leading to grave injury.
Accurate measurement to maintain required disinfection value using electrolysis.
Accurate measurement and dosing to ensure water quality using chemicals.
Daily dosing of biocide protects water against algae, complementing disinfection.
Controls filtration timing, water levels, and filter backwashing operations.
Step-by-step guide for installing the pH probe into its housing.
Step-by-step guide for installing CLF or Redox probes into their housing.
Explains chlorine generation dependency on salt concentration and temperature.
Details key water parameters and their impact on water quality and system performance.
Steps for initial setup, including water cleanliness and probe setting.
Stops pH dosing and displays error if measured pH does not decrease after preset doses.
Procedure to calibrate the pH probe to ensure accurate readings.
Details on connecting ASIN AQUA Salt via Home, Mobile, Wi-Fi, or Powerline.
Using the Pool Live app to monitor pool status on mobile devices.
Errors for low reagent levels, pump failure, or dosing issues.
Errors for clogged injection valves or no water flow to probes.
Errors for probe failure, mechanical damage, or device overheating.
ASIN AQUA stops pH control for 2 hours after rapid pH changes, e.g., from refilling.
Handles overload from high salt and warns for low salt concentration.
Addresses no flow to probes and low pH issues affecting chlorine production.
To Next Page
