Need help?Do you have a question about the ASENWARE Addressable Fire Alarm Control Panel and is the answer not in the manual?
Key features and capabilities of the fire alarm control panel.
Specifications for mains and backup power supplies.
How to change passwords for different user access levels.
Actions performed by the panel upon receiving a fire alarm signal.
Operator steps to take during a fire alarm.
Operator steps to take when a fault occurs.
Key features that make the panel user-friendly for programming.
Recommended steps before starting panel programming.
Detailed steps for changing user passwords.
Accessing the main programming interface.
Checking device status, testing, and isolating individual devices.
Setting panel name, loops, screen saver, printer, and time.
Viewing zone status, delay times, and testing/disablement.
Network and communication settings (TCP/IP, CAN, Cloud, GSM).
Configuring network settings using IP and DNS.
Defining and assigning names to devices.
Technical specifications and features of the AW-D101 smoke detector.
Technical specifications and features of the AW-D102 heat detector.
Technical specifications for the AW-D103 combined detector.
Technical details of the AW-D106 addressable horn strobe.
General| Enclosure Protection Rating | IP30 |
|---|---|
| Max Loop Capacity | 4 Loops |
| Operating Voltage | 220VAC/50Hz |
| Standby Battery | 24VDC |
| Communication Protocol | Proprietary addressable communication protocol |
| Communication Interface | RS485 |
| Display | LCD |
| LCD Display | 128x64 dot matrix LCD backlight display |
| Event Log | 1000 history events |
| Relative Humidity | ≤95% (non-condensing) |
| Alarm Sounder Output | 24VDC |
To Next Page
