Need help?Do you have a question about the Ashdown ABM-EVO IV and is the answer not in the manual?
General| Type | Bass Amplifier Head |
|---|---|
| Channels | 1 |
| Tube Preamp | Yes |
| Preamp | 12AX7 |
| Inputs | 1 x 1/4" (instrument) |
| Speaker Outputs | 2 x Speakon |
| Outputs | 1 x XLR, 1 x 1/4" (line out) |
Information and link for registering the amplifier online for customer support.
Details the instrument input, passive/active switch, and input level control with VU meter.
Explains the effect of the Push Flat/Shape button on the EQ response.
Details the Valve Drive Plus section for tonal character and overdrive.
How to switch the valve drive section in or out, also via footswitch.
Function to switch the entire Equalisation section in or out.
Explains the 9-band EQ, combining tone controls and sliders for versatile tone shaping.
Details how compression adds bottom end, definition, and sustain to the bass sound.
Describes the push button to activate or deactivate the compression effect.
Explains the Sub Harmonics feature for thickening the sound with a lower octave.
Information on the balanced D.I. output for connecting to mixing desks or recording.
Details the Push to Mute function and the dedicated Tuner Out socket.
Describes Line Out, Output Level, Line Input, and Effects Send/Return.
Information on the 4-way footswitch socket and speaker output connections.
Details impedance and input range for High, Low, Line, and Effects Return inputs.
Details impedance and level for Tuner, Line, Effects Send, and D.I. outputs.
Details specific frequency boosts/cuts for Shape, Bass, Middle, Treble, and EQ sliders.
Specifies the amplifier's frequency response range.
Details minimum impedance for speaker outputs.
States the RMS and Peak output power per power section.
To Next Page
