Need help?Do you have a question about the Ashdown Five 15 and is the answer not in the manual?
General| Type | Bass Combo Amplifier |
|---|---|
| Power Output | 100 Watts |
| Impedance | 8 Ohms |
| Speaker Size | 15" |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x XLR DI Output |
Expresses gratitude for purchasing the Ashdown amplifier and encourages reading the manual for optimal use and service.
Provides instructions and a URL for registering the product to ensure customer support through the in-house service centre.
Details the terms and conditions of the amplifier's five-year limited warranty against defects in materials and workmanship.
Lists essential safety precautions to follow when using electrical products, including avoiding water and high volumes.
Explains the meaning of warning symbols and cautionary statements found on the equipment, such as risk of electric shock.
Provides essential instructions for grounding the product to reduce the risk of electric shock and ensure proper safety.
Describes the controls and features located on the front panel of the amplifier, including EQ and input sections.
Details the connections and components found on the rear panel of the amplifier, such as the power switch and mains inlet.
Lists the technical specifications for the Ashdown After Eight amplifier model, including output power and EQ type.
Lists the technical specifications for the Ashdown Perfect Ten Combo amplifier model, including output power and EQ type.
Explains the instrument input jack, its sensitivity, and how to set the input level using the VU meter for optimal signal.
Details the Bass, Middle, Treble controls and their versatile dual-slider EQ system for comprehensive tone shaping.
Describes the Line In socket for external devices and the headphone jack for silent practice, including MIX Level.
Describes the MASTER control for adjusting the overall amplifier output volume to the desired stage playing level.
Lists the impedance and input/output levels for various connections like High Input, Low Input, and Effects Send/Return.
Details the EQ frequency adjustments for Bass, Lo Mid, Middle, Hi Mid, and Treble controls for tone shaping.
Explains passive/active input jacks and setting the input signal level using the VU meter for optimal preamp performance.
Details the DEEP and BRIGHT buttons for EQ boosts and the main EQ section with tone and rotary controls.
Explains the compression function for dynamics and the sub-harmonics generator for thickening the bass sound.
Describes DI output, effects send/return loop, tuner/line out, and the master output level control.
Lists the specific EQ adjustments for Bass, Lo Mid, Middle, Hi Mid, Treble, Deep (+8dB @ 50Hz), and Bright (+10dB @ 10kHz).
Explains passive/active input jacks and setting the input signal level using the VU meter for optimal preamp performance.
Details the EQ section with tone controls and EQ buttons like DEEP and BRIGHT for tone shaping.
Explains the compression function for dynamics and the valve-emulated overdrive for adding character to the sound.
Describes the sub-harmonics generator, DI output, effects send/return loop, and tuner/line out.
Describes the master output control for adjusting the overall amplifier volume to the desired stage playing level.
Lists the specific EQ adjustments for Bass, Lo Mid, Middle, Hi Mid, and Treble controls for tone shaping.
Explains input options, PUSH FLAT/SHAPE button, and Valve Drive for clean or tube overdrive character.
Details the EQ section (IN/OUT) for tone shaping and the Compression function for dynamics control.
Describes the sub-harmonics generator for sound thickening and the DI output with pre/post EQ selection.
Explains the mute function, tuner output, line output, and master output level control for versatile operation.
Lists EQ adjustments including Bass, Middle, Treble controls and the two sets of sliders for versatile tone shaping.
To Next Page
