Need help?Do you have a question about the Ashdown CTM-30-Little Stubby and is the answer not in the manual?
Expresses gratitude for purchasing the amplifier and welcomes the user to the family.
Encourages product registration for customer support and provides a URL.
High/Low sensitivity toggle for passive and active bass instruments.
Adjusts gain from clean tones to rich harmonic distortion.
Alters the slope of lower frequencies in the bass control section.
Bass, Middle, and Treble controls with a wide frequency range.
Adjusts the overall stage playing volume of the amplifier.
Provides a visual display of the amp's output for headroom management.
Details the IEC connector and voltage information.
Details nominal mV and impedance for high/low sensitivity inputs.
Describes the valve driven and recovered effects loop.
Explains the transformer-generated, isolated DI signal for line level.
Details the passive EQ circuit and feedback control function.
Describes the all-valve design and 30-watt output.
Lists the specific valves used in the amplifier.
General| Power Output | 30 Watts |
|---|---|
| EQ | Bass, Middle, Treble |
| Effects Loop | No |
| Type | Bass Amplifier |
| Inputs | 1x 1/4" Jack |
| Tubes | 1 x ECC83 |
| Outputs | 1 x 1/4" Speaker Output |
To Next Page