Ashland SOFA - User Manual

STOP
WARNING
WW - 3 / 17 / 2017
SOFA
ASSEMBLY INSTRUCTIONS
This product has been designed for seating three (3) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
This product is designed for home use and not intended for commercial use.
Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Need parts or assistance?
Please call :
866-626-7826
For prompt, reliable service; please have your assembly
manual ready.
If a part is missing or damaged, call our
toll - free customer service line.
DO NOT RETURN PRODUCT TO THE
STORE
individual stores do not stock parts.

Summary

Sofa Assembly Guide

General Warnings and Safety

Key safety precautions, usage guidelines, and handling recommendations for the sofa.

Customer Service and Returns

Instructions for product returns and obtaining assistance for missing or damaged parts.

Parts Identification

List of all components included in the sofa package with their quantities.

Step 1: Attaching Legs

Procedure for attaching the sofa legs to the main body using washers.

Step 2: Attaching Arms

Instructions on how to connect the armrests to the sofa body.

Step 4: Attaching Backrest

Method for securing the sofa backrest to the assembled base.

Overview

1. Safety Warnings and Recommendations
2. Customer Support
3. Parts List
4. Assembly Steps
5. Step 1: Unpacking and Attaching Legs
6. Step 2: Attaching Arms
7. Step 3: (Implicit - No separate step provided for this, but typically involves ensuring all connections are secure before proceeding)
8. Step 4: Attaching Backrest
9. Installation Complete

This document outlines the assembly instructions for a sofa, designed for home use. It is not intended for commercial use. The sofa is designed to seat three (3) average adults.

Safety Warnings and Recommendations:

• Jumping Prohibited: To prevent injury and damage to the unit, jumping on the sofa is strictly prohibited.
• Children and Infants: Children under the age of 5, small infants, and babies should not sleep alone on this product for safety reasons.
• Handling: It is recommended that two (2) people handle the sofa during assembly, though an extra hand is always beneficial.
• Important Safety Information: The instruction booklet contains important safety information that should be read and kept for future reference.

Customer Support:

• Do Not Return to Store: Customers are advised not to return the product to the store, as individual stores may not stock replacement parts.
• Missing or Damaged Parts: For missing or damaged parts, or for assistance, customers should call the toll-free customer service line at 866-626-7826. It is recommended to have the assembly manual ready for prompt and reliable service.

Parts List:

The sofa assembly requires the following parts:

• Sofa Body (1): QTY: 1
• Backrest (2): QTY: 1
• Arm (3): QTY: 1 Pair (Left and Right)
• Leg (4): QTY: 4
• M10 Washer (Outer Dim. 45mm) (5): QTY: 4

Assembly Steps:

Step 1: Unpacking and Attaching Legs

1. Locate Components: The sofa body (1) contains the backrest (2), arms (3), legs (4), and M10 washers (5) inside its compartments.
2. Remove Components: Carefully open the compartments within the sofa body (1) to retrieve the backrest (2), arms (3), legs (4), and M10 washers (5).
3. Prepare for Leg Attachment: Invert the sofa body (1) to access the underside where the legs will be attached.
4. Attach Legs: For each of the four leg attachment points:
   • Place one M10 washer (5) onto the threaded bolt of a leg (4).
   • Screw the leg (4) with the washer (5) into the corresponding threaded hole on the underside of the sofa body (1).
   • Tighten each leg securely, ensuring it is firm and stable. Repeat for all four legs.

Step 2: Attaching Arms

1. Position Sofa Body: Place the sofa body (1) upright on its newly attached legs.
2. Identify Arm Attachment Points: Locate the metal brackets on the sides of the sofa body (1) and the corresponding brackets on the arms (3).
3. Attach Arms:
   • Align one arm (3) with the side of the sofa body (1), ensuring the metal brackets interlock.
   • Gently push the arm downwards until the brackets are fully engaged and the arm is securely attached to the sofa body.
   • Repeat this process for the second arm (3) on the opposite side of the sofa body (1).

Step 3: (Implicit - No separate step provided for this, but typically involves ensuring all connections are secure before proceeding)

• Verify that the arms are firmly attached and do not wobble.

Step 4: Attaching Backrest

1. Position Backrest: Take the backrest (2) and align its metal brackets with the corresponding brackets located on the back of the sofa body (1) and between the attached arms.
2. Engage Backrest: Gently lower the backrest (2) into position, ensuring that the metal brackets on the backrest slide down and interlock with the brackets on the sofa body.
3. Secure Backrest: Push the backrest firmly downwards until it is fully seated and securely attached. The backrest should feel stable and not loose.
4. Final Adjustment: Once the backrest is attached, smooth out any fabric or cushioning to ensure a neat appearance.

Installation Complete:

The sofa assembly is now complete. The sofa is ready for use.

Ashland SOFA Specifications

General

Brand	Ashland
Model	SOFA
Category	Indoor Furnishing
Language	English