This document outlines the assembly instructions for a sofa, designed for home use. It is not intended for commercial use. The sofa is designed to seat three (3) average adults.

Safety Warnings and Recommendations:

Jumping Prohibited: To prevent injury and damage to the unit, jumping on the sofa is strictly prohibited.
Children and Infants: Children under the age of 5, small infants, and babies should not sleep alone on this product for safety reasons.
Handling: It is recommended that two (2) people handle the sofa during assembly, though an extra hand is always beneficial.
Important Safety Information: The instruction booklet contains important safety information that should be read and kept for future reference.

Customer Support:

Do Not Return to Store: Customers are advised not to return the product to the store, as individual stores may not stock replacement parts.
Missing or Damaged Parts: For missing or damaged parts, or for assistance, customers should call the toll-free customer service line at 866-626-7826. It is recommended to have the assembly manual ready for prompt and reliable service.

Parts List:

The sofa assembly requires the following parts:

Sofa Body (1): QTY: 1
Backrest (2): QTY: 1
Arm (3): QTY: 1 Pair (Left and Right)
Leg (4): QTY: 4
M10 Washer (Outer Dim. 45mm) (5): QTY: 4

Assembly Steps:

Step 1: Unpacking and Attaching Legs

Locate Components: The sofa body (1) contains the backrest (2), arms (3), legs (4), and M10 washers (5) inside its compartments.
Remove Components: Carefully open the compartments within the sofa body (1) to retrieve the backrest (2), arms (3), legs (4), and M10 washers (5).
Prepare for Leg Attachment: Invert the sofa body (1) to access the underside where the legs will be attached.
Attach Legs: For each of the four leg attachment points:
- Place one M10 washer (5) onto the threaded bolt of a leg (4).
- Screw the leg (4) with the washer (5) into the corresponding threaded hole on the underside of the sofa body (1).
- Tighten each leg securely, ensuring it is firm and stable. Repeat for all four legs.

Step 2: Attaching Arms

Position Sofa Body: Place the sofa body (1) upright on its newly attached legs.
Identify Arm Attachment Points: Locate the metal brackets on the sides of the sofa body (1) and the corresponding brackets on the arms (3).
Attach Arms:
- Align one arm (3) with the side of the sofa body (1), ensuring the metal brackets interlock.
- Gently push the arm downwards until the brackets are fully engaged and the arm is securely attached to the sofa body.
- Repeat this process for the second arm (3) on the opposite side of the sofa body (1).

Step 3: (Implicit - No separate step provided for this, but typically involves ensuring all connections are secure before proceeding)

Verify that the arms are firmly attached and do not wobble.

Step 4: Attaching Backrest

Position Backrest: Take the backrest (2) and align its metal brackets with the corresponding brackets located on the back of the sofa body (1) and between the attached arms.
Engage Backrest: Gently lower the backrest (2) into position, ensuring that the metal brackets on the backrest slide down and interlock with the brackets on the sofa body.
Secure Backrest: Push the backrest firmly downwards until it is fully seated and securely attached. The backrest should feel stable and not loose.
Final Adjustment: Once the backrest is attached, smooth out any fabric or cushioning to ensure a neat appearance.

Installation Complete:

The sofa assembly is now complete. The sofa is ready for use.

Ashland SOFA - Page 7