19
7.6 Factory Settings
CURRENT:
This resets all the current parameters back to factory default settings only,
while stored presets and system settings stay untouched.
SYSTEM-SETUP MENU: Reset
RESET CURRENT: No
7.7 Noise Gate Settings
This Internal System Optimizer reduces ground floor noise if no signal is present.
If unwanted Noise Gate effects are audible on low sound levels it can be switched
to bypass mode.
SYSTEM-SETUP MENU: N Gate
THRESHOLD: 102
BYPASS: On
7.8 INFO
SYSTEM-SETUP MENU: Info
DEVICE NAME:
FIRMWARE: v9.15
SECURE CODE: 11110000
This menu contains 3 info lines:
1. The first line displays the device name
2. The second line displays the Firmware version
3. The third line displays the security code.
When no password is set the factory default code is 11110000. When
another combination of characters is displayed a password is set in
the device and certain functions are disabled for the user to modify.
To Next Page
Loading...