26 GG Surveyor GPS+GLONASS Reference Manual
POW parameters Power Capacity of External Battery ALL 0’S
NMEA messages NMEA Message Output Status OFF in all ports
PER NMEA Messages Output Rate 001.0
RCI Raw Data Output Rate 020.0
MSV Minimum Number of SV’s for Data Record-
ing
03
ELM Elevation Mask for Data Recording 5
SIT Site ID Name ????
EPG Kinematic Epoch Counter 000
RAW data Raw Data Output Status OFF in all ports
Raw data format Raw Data Output Format Binary
Serial Port Baud Rate Serial Ports Baud Rate Selection 9600 in all ports
RTCM MODE RTCM Differential Mode Selection OFF
RTCM PORT RTCM Differential Mode Port Selection B
AUT Automatic Differential/Autonomous Switch-
ing when RTCM Differential Mode Enabled
N
RTCM SPD RTCM Differential BPS Speed Setting 0300
STI RTCM Base or Remote Station ID Setting 0000
STH RTCM Base Station Health Setting 0
MAX Maximum Age for old RTCM Corrections to
be Used
0030
QAF RTCM Communication Quality Setting 100
SEQ Use Sequence Number of RTCM Correction
in Remote Station
N
TYPE RTCM differential Messages Enabled and
Output Frequency of the Enabled Messages
1 = 99, 31 = 99, 6 = OFF,
6G = OFF, remaining mes-
sages 00
RTCM EOT End of Character Selection for RTCM Cor-
rections
CRLF
CPD MODE CPD Mode Selection OFF
AFP Setting of Ambiguity Fixing Confidence
Level
099.0
Table 4.1: Default Receiver Parameter (continued)
Parameter Description Default
To Next Page
