16
Using the Projector
The projector is equipped with a self-locking, quick-release foot
and a leveling foot.
To raise the projector:
1 Raise the projector to the height you want, then press and
hold the foot release button. Release the button to lock the foot
into position (Figure 11).
2 If necessary, manually rotate the leveling foot to adjust the
angle of the projected image.
FIGURE 11
Adjusting the height of the projector
foot release button
leveling foot
M2+.book Page 16 Thursday, April 8, 2004 8:10 AM
To Next Page
Loading...
