Asko DSD444B/1 - Page 24

OptionsSettings
Adjusting the water softener. Select a setting
depending on the hardness of the water supply. It
is important that this setting is correct!
0/1/2/3/4/5/6/7/8/9Water hardness8.
Recommended
setting
French water
hardness
scale
German water
hardness
scale
00-9°fH0-5°dH
110-14°fH6-8°dH
215-20°fH9-11°dH
321-25°fH12-14°dH
426-34°fH15-19°dH
535-43°fH22-24°dH
644-52°fH25-29°dH
753-70°fH30-39°dH
871-88°fH40-49°dH
989°fH50°dH
Do not forget to put salt in the salt compartment
after you have set the water softener to 1 - 9.
For a water supply with a hardness under 6°dH
(9°fH), select 0. The water softener is deactivated
and no salt is needed.
To exit the dishwasher's Settings menu, select Exit
and confirm your selection with the mode selector
.
Exit
Table continued from last page
24
Settings