OptionsSettings
For adjusting the contrast of the display.Contrast top
display1/2/3/4
Display settings4.
Setting to hide the logo shown on the
display.
Logo in top display On/Off
This sound is used to confirm each button
press.
0/1/2/3Feedback sound5.
The buzzer indicates when a dishwashing
program has ended.
0/1/2/3Buzzer volume6.
Error messages are always indicated by a
loud buzzer.
Setting for rinse aid dosage. The rinse aid
dispenser can be adjusted between 0 (Off)
and 5 (High dosage).
0/1/2/3/4/5/TABRinse aid7.
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue
film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft
water, the rinse aid can be diluted 50:50
with water.
When using an all-in-one detergent that
contains rinse aid, you can activate the
setting TAB.
Super rinse adds two extra rinses.On/OffSuper rinse8.
Activated in the following programs:
Eco
Universal
Plastic
Upper half
Lower half
Activate the setting Extra Dry to improve the
drying results. Energy consumption is slightly
increased.
On/OffExtra Dry9.
Activated in the following programs (although
not if the Auto Open option is selected):
Eco
Auto
Universal
Plastic
Upper half
Lower half
24
Settings
To Next Page
Loading...
