22
SETTING THE PUMPING-OUT TIME
The pumping-out time can suitably be extended if you are using a long drain hose, max. 3 metres,
or if the machine for any other reason has difficulty in pumping out the waste water in time. Proceed as
follows:
Display Lamps
1.PRESS QUICK WASH FIVE TIMES* (WITHIN 15 SECONDS)
2. PRESS QUICK WASH ONCE FOR 20 SECONDS PUMPING-OUT TIME 20
OR
2. PRESS RINSE ONCE FOR 25 SECONDS PUMPING-OUT TIME (NORMAL) 25
2. PRESS THE ECO/BIO FUNCTION ONCE FOR 35 SECONDS PUMPING-OUT TIME 35
2. PRESS TEMPERATURE CHOICE ONCE FOR 45 SECONDS PUMPING-OUT TIME 45
2. PRESS HEATED DRYING ONCE FOR 85 SECONDS PUMPING-OUT TIME 85
* The latest selected setting will be shown.
SETTING THE WATER HARDNESS
If you have a dishwasher that is equipped with a water softener you may wish to alter its setting
depending on hardness of the water in your area. The softener is set at 10-14°dH on delivery.
1. PRESS DRYING HEAT FIVE TIMES* (WITHIN 15 SECONDS)
2. PRESS NORMAL WASH ONCE FOR WATER HARDNESS 0-9** 1
OR
2. PRESS QUICK WASH ONCE FOR WATER HARDNESS 10-14** 2
2. PRESS RINSE ONCE FOR WATER HARDNESS 15-19** 3
2. PRESS THE ECO/BIO FUNCTION ONCE FOR WATER HARDNESS 20-24** 4
2. PRESS TEMPERATURE CHOICE ONCE FOR WATER HARDNESS 25-34** 5
2. PRESS DRYING HEAT ONCE FOR WATER HARDNESS 35-49** 6
2. PRESS DELAYED START ONCE FOR WATER HARDNESS 50-70** 7
* The latest selected setting will be shown.
** °dH
To Next Page
Loading...
