OptionsSettings
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one detergent that contains rinse aid, you
can activate the setting TAB.
Temperatures can be displayed in °C (Celsius) or °F (Fahrenheit).
o
C/
o
FTemperature unit8.
Adjusting the water softener. Select a setting depending on the
hardness of the water supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9Water hardness9.
Recommended
setting
French water
hardness scale
German water
hardness scale
00-5°fH0-3°dH
16-9°fH4-5°dH
210-14°fH6-8°dH
315-20°fH9-11°dH
421-25°fH12-14°dH
526-34°fH15-19°dH
635-43°fH20-24°dH
744-52°fH25-29°dH
853-70°fH30-39°dH
971°fH40°dH
Do not forget to put salt in the salt compartment after you have
set the water softener to 1 - 9.
For a water supply with a hardness under 4°dH (6°fH), select 0.
The water softener is deactivated and no salt is needed.
To exit the dishwasher's Settings menu, select Exit and confirm
your selection with Start/Stop.
Exit
13
To Next Page
Loading...
