Need help?Do you have a question about the Asko DW95 and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Child lock | Yes |
| Size | Full-size |
| Noise Level | 44 dB |
| Delay start | Yes, up to 24 hours |
Details the single-phase and two-phase electrical supply requirements.
Explains the fan's role in evacuating moist air during the drying phase.
Describes the sequence of water flow through the softener during washing.
Explains how the resin container softens water by ion exchange.
Details the process of regenerating the resin using salt water.
Illustrates the water flow into the salt container and ion replacement.
Explains insoluble lime deposits formed from untreated hard water.
Shows chemical reactions producing water-soluble salts from softened water.
Details the Rinse & Hold program, which involves one pre-wash without heat.
Describes how to test the functions of electrical components.
Details how to set the water hardness level for machines with softeners.
Lists common fault codes and their meanings for various components.
Outlines single-phase and two-phase supply options and power requirements.
Describes how the fan system removes moist air during the drying phase.
Explains the step-by-step operation of the water softener during washing cycles.
Details the resin container's role in softening water via ion exchange.
Describes the process of regenerating the resin with salt-saturated water.
Illustrates the chemical transformation within the salt container.
Explains the formation of insoluble lime deposits from hard water.
Shows the chemical reaction of softening water using salt.
To Next Page
