31
AUTOMATIC OVEN CLEANING – PYROLYSIS
This function allows automatic cleaning of the oven interior and the deep and shallow baking tray, by means of high
temperature that incinerates the fat residues and other impurities to reduce them to ashes.
During the pyrolysis process, food and fat residues may ignite. Therefore, remove any visible dirt and food residues from
the oven interior before starting the program.
Before pyrolytic cleaning, remove all equipment from
the oven (including the telescopic
guides).
1
Turn the COOKING SYSTEM SELECTOR KNOB
to ”P”.Cleaning intensity level and time are
displayed.
2
Choose the desired cleaning intensity. Touch the
TEMPERATURE key and rotate the SETTINGS
KNOB (-/+).
3
After a certain period of time, oven door will be
automatically locked for your safety. The key
symbol will appear on the display.
Unpleasant smell may be emitted from the oven during
the cleaning process. After pyrolytic cleaning, there
will be some ashes on the bottom of the oven cavity
and stain residues on the edges.
When the oven cools down, clean all residues with a
damp cloth and a non-abrasive sponge. Wipe the oven
door and the adjacent surfaces in the gasket area. Do
not rub the gasket.
During cleaning, the appliance becomes very hot on the outside. Never hang fl ammable objects like kitchen cloths or
similar on the front panel of the appliance.
Do not attempt to open the oven door while the
automatic cleaning process is in progress. The
program may be terminated. Risk of burns!
To Next Page
Loading...
Need help?
General
