36
Customer Care Center, 1-800-898-1879, www.askousa.com
FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Info EXITError 3
5
Press the INFO button to display the
error description.
Switch off the dryer and turn it back on.
Errors indicated on the display unit (depending on the model) may include the following:
Problem/
error
Error indication on the display What to do?
ERROR_0
E-O - Please contact ASKO Service.
Control unit failure.
Call a service technician.
ERROR_1
E-1 - Thermistor fault. Please contact ASKO Service.
Temperature sensor failure.
Call a service technician.
ERROR_3
E-3 - Pump failure. Please contact ASKO Service.
Failure on the pump for pumping the
condensate into the condensate tank
Call a service technician.
ERROR_4
E-4 - Please clean filters or contact ASKO Service.
Filter error.
Clean the filters. See chapter
"CLEANING AND MAINTENANCE" or
call a service technician.
ERROR_5
E-5 - Max program time
Call a service technician.
To Next Page
Loading...
