Cleaning the lint filter
The lint filter must be cleaned after each load. The
filter can either be removed from its holder in the
door or cleaned in place.
1. Lift the filter from its holder in the door or open
the filter by grasping the filter handle and
pulling it toward you.
2. Open the filter and remove the lint from all
sides of it by hand. Use a soft dry cloth and, if
necessary, a sponge with a small amount of
liquid hand-washing detergent to remove any
deposits. Dry the filter carefully with a towel.
3. If you removed the filter, it must be replaced in
its holder in the door.Close the filter before
closing the door.
Cleaning the outside of the machine
Clean the outside of the machine and the program
panel with a mild cleaner. Do not use solvents,
as these can damage the machine. Do not hose
down or spray the machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble dryer
clean and cool; dust, heat, and moisture prolong
drying times.
13Customer Care Center
1-800-898-1879
www.askousa.com
Care and maintenance instructions
To Next Page
Loading...
