Asko T793C - Program Interface and Performance

Menu overview
1.
2.
3.
4.
6.
7.
5.
10.20 09.20
5.
1. Auto Heavy
2. Auto Normal
3. Auto Delicate
4. Auto Iron Dry
Anti Wrinkle
function
Temperature
Delayed Start
End
End time
Clock
Stop
Start
6. Synthetic
7. Timed dry
8. Air fluff programme
Time Saver /
Time Saver Off
9. Settings
5. Jeans
Time Saver OffTime SaverTemperature LowTemperature Normal
Note!
The illustration shows an example of a program.
Program chart
Here we present a few examples of the energy and time consumption of a few different program settings.
Consumption can vary due to room temperature, humidity, load, variations in the power supply, and se-
lected options
For the consumption values given below, the requirements
are as follows:
73°F (23°C)Temperature of intake air:
55 %Moisture content of intake air:
Normal or LowDrying temperature:
2500WHeater output:
Program chart
Program time
(approx. hrs and min.)
Energy consumption
(approx. kWh)
Max. load
(lb)
TemperatureMaterialProgram
1600 rpm800 rpm1600 rpm800 rpm
1:351:553.84.713NormalCotton, linenAuto Heavy
1:201:403.24.113NormalCotton, linenAuto Normal
-0:45-1.87NormalWrinkle-resistant,
polyester/cotton
Auto Normal
1:101:352.93.913NormalCotton, linen
1)
Auto Delicate
-0:40-1.77NormalWrinkle-resistant,
polyester/cotton
Auto Delicate
-1:20-2.17LowAcrylic, rayon, acetateAuto Delicate
1:101:252.22.913NormalCotton, linenAuto Iron Dry
13Customer Care Center
1-800-898-1879
www.askousa.com
Operating instructions