14
In order to make an alteration, however, the
part of the program that you wish to alter must
not have been activated yet.
- Program – the program is not affected when
the program knob is operated. Interrupt the
program instead.
- Temperature – can be altered before the
temperature has been reached in the main
wash.
- Spin speed – before the machine enters spin
mode.
- Super rinse – before the machine enters
rinse mode.
PROGRAM COMPLETED
The program is complete when the door
can be opened with the
button. If
you have selected a program without spinning,
and if water remains in the machine, run the
Spin or Drain program to enable the door to be
opened.
WHEN WASHING IS FINISHED
Turn off the main power switch and
close the washer door to prevent small
children from crawling into the machine.
8
To Next Page
Loading...
Need help?
General
