20
- Check the drain hose and the drain pump.
Proceed as follows:
1. If necessary, straighten out any folds in the
drain hose.
2. Has any object become trapped in the outlet
from the drain hose? Clean the hose.
3. Is the drain pump blocked by a foreign body?
Clean the pump; see Chapter 10, Care and cle-
aning.
4. Run either of the Drain or Spin programs at
a suitable speed to remove the water.
PROGRAMS TAKE TOO LONG
If a normal program takes over three hours, for
example, the heating has probably failed to func-
tion. Start a new program. If the fault is repea-
ted frequently, call the service department.
To Next Page
Loading...
