Asko WM55A - Occasional Spin or Rinse Functionality

Occasional spinning or rinsing
If you want to run a spin or rinse program only
occasionally, without changing
P1
-
P4
, you may
do so as follows:
1. Load the wash and close the door.
2. Press the
P1
-button once.
3. Press the
Menu
-button once.
4. Step forward with
until the Spin or
Rinse program appears on the display.
5. Press the
Enter
-button once. The selected
program appears on the display.
6. Adjust the Spin speed by stepping forward with
if so required.
7. Press
to start the program.