How to fix lighting not working in Askoll PURE XL HC LED Aquariums?
If the lighting in your Askoll Aquariums isn't working, first check if the LED driver is properly connected to the power outlet. If not, connect it. Also, ensure the lighting unit is securely connected to the LED driver with its connector.
What to do if there is no water flow in Askoll Aquariums?
If there's no water flow in your Askoll Aquariums, start by ensuring the pump is plugged into its power outlet. Also, the pump might be jammed, so clean the impeller.
Why is the water temperature low in Askoll PURE XL HC LED Aquariums?
If the water temperature is low in your Askoll Aquariums, make sure the thermal heater is plugged into its power outlet. Also, check that the thermal heater adjustment knob is set to the correct temperature. If the ambient temperature is too low, consider adding a supplementary thermal heater.
How to increase water flow in Askoll Aquariums?
If you're experiencing low water flow in your Askoll Aquariums, the intake tube, pump, delivery tube, or delivery may be clogged. Clean these parts to resolve the issue.
Read and understand the manual before use. Keep for future reference.
Drip loops, avoid wet plugs/outlets, disconnect power before handling.
Handle glass carefully, ensure level support, do not move when full.
Allow hot parts to cool, check water level is within min/max range.
Lists and illustrates all aquarium components included in the package.
Provides detailed specifications including capacity, weight, dimensions, and power.
Instructions for safely removing components from packaging and checking contents.
Guidelines for placing the aquarium on a stable, level surface away from heat.
Step-by-step guide for assembling the aquarium and its components.
Instructions for connecting electrical devices and filling the tank with water.
General steps and checks for operating the aquarium system after setup.
How to set automatic light cycles, manual modes, and timer functions.
Explains mechanical, biological, and chemical filtration processes and media.
Information on the thermal heater, its calibration, and usage for temperature control.
Schedule for routine cleaning of the tank, filters, and mechanical components.
Recommends replacement intervals for filter media like sponges and cartridges.
Detailed steps for cleaning and maintaining the aquarium pump.
Instructions for cleaning the lighting unit and its covers.
Steps for cleaning the thermal heater glass tube and ensuring proper function.
General| Color Temperature | 6500K |
|---|---|
| Dimensions | 60 x 30 x 40 cm |
| Waterproof Rating | IP67 |
| Filter | Included |
| LED Lifespan | 50, 000 hours |
| Lighting | LED |
| Beam Angle | 120 degrees |
To Next Page