1
PO-1775F
‘PC’ PUMPS
OPERATOR’S MANUAL & PARTS LIST
for End-Suction Centrifugal Pumps
(Non-Self Priming)
Before reading or using this manual be certain of the material of construction of your pump. Check the model
number label on the pump as follows:
POLYESTER pumps have model numbers beginning with PCE and price codes beginning with 60-1.
POLYPROPYLENE pumps have model numbers beginning with PCP and price codes beginning with 60-2.
RYTON pumps have model numbers beginning with PCR and price codes beginning with 60-3.
NORYL pumps have model numbers beginning with PCN and price codes beginning with 60-4.
SAFETY WARNING
Verify the chemical compatibility of the materials of your pump with the liquid you want to pump. If you are uncertain regard-
ing chemical compatibility, contact your dealer for applications assistance and request a copy of our Corrosion Resistance
Charges. Do not use a pump that is not chemically compatible with the liquid you intend to pump or serious bodily injury,
death,re,explosion,orenvironmentaldamagecouldresult.
ALSO, PLEASE READ SECTION I, II AND III BEFORE OPERATING PUMP.
I. Safety Precautions ..................................................................................................................................... 2
II. Preparing the Pump for Operation ........................................................................................................... 3
III. Pump Operating Instructions.................................................................................................................... 4
OPERATION AND
SERVICE GUIDE
PO-1775F
JAN. 2012
2”,ElectricDriveFlexible(Long)Coupled 3”CastIronPedestalMount 2”,HydraulicDriveClose-Coupled
1½” / 2” Pneumatic Drive Close-Coupled 1½”/2” Engine Drive Close-Coupled 1½” / 2” Electric Drive, Close-Coupled
To Next Page
Need help?
General
