WARNING:
DO NOT use any battery if its current does not match with your product.
ONLY Use tools with insulated handles and tips to prevent inadvertent shorts.
Always ensure the polarity (positive + and negative -) of the battery matches the direction of the
battery comparment when installing.Install the battery correctly and carefully.Not doing so will increase
the risk of battery failure that may result on fire or explosion.
In an event of a battery venting please put aside the battery and the product which it is installed at a
safe and open area with no flammable materials close by and use proper fire extinguishing technique
and materials to safely contain the situation.When it is safe please dispose the battery and the product
to which it is installed according to laws governing the area where they are to be recycled or thrown
away.
DO NOT mishandle or mistreat batteries.This includes but is not limited to:disassembly,cutting,
puncturing,or incinerating
DO NOT leave batteries or devices charging unattended
To Next Page
Loading...
