Need help?Do you have a question about the asmodus LUSTRO 200W and is the answer not in the manual?
General| Wattage Range | 5W - 200W |
|---|---|
| Temperature Control Range | 200°F - 600°F / 100°C - 315°C |
| Resistance Range (VW Mode) | 0.1Ω - 3.0Ω |
| Material | Zinc Alloy |
| Touch Screen | Yes |
| Battery Type | Dual 18650 |
| Charging | Micro USB |
| Color Options | Black, Rainbow |
| Output Modes | VW, TC (Ni, Ti, SS), TCR |
Select operating mode (POWER, TEMP, CURVE, TCR, TFR).
Adjust settings for POWER, TEMP, CURVE, TCR, TFR modes.
How to properly power off the device.
Set or clear the puff count limit.
Steps to update the device's firmware via computer.
Access and use the device's built-in flashlight.
Enable or disable gesture controls on the device.
Check and adjust coil resistance for optimal performance.
Learn how to lock and unlock the device's screen and system.
Proper procedure for inserting and removing batteries.
To Next Page
