Need help?Do you have a question about the Asoka PlugLink PL9660-Q1 and is the answer not in the manual?
General| Model | PL9660-Q1 |
|---|---|
| Type | Powerline Adapter |
| Powerline Standard | HomePlug AV2 |
| Encryption | 128-bit AES |
| Input Voltage | 100-240V AC |
| Standards | IEEE 1901 |
| Ports | 1 Gigabit Ethernet Port |
| Compatibility | HomePlug AV |
| Certification | FCC, CE |
| Category | Adapter |
Provides contact details and hours for customer assistance.
Information on how to reach technical support for product issues and troubleshooting.
Lists the items included in the PlugLink HD AV Adapter package.
Describes various ways to connect the PlugLink HD AV Adapter to devices.
Explains setting up a basic connection between computers.
Details configuring the adapter for sharing a broadband internet connection.
Illustrates connecting the adapter with other Ethernet-enabled devices.
Provides guidelines for selecting an optimal location for the adapter.
Step-by-step instructions for physically connecting the adapter.
Guides users through installing the Power Manager utility software.
Shows how to view details of connected PlugLinkAV devices on the network.
Instructions for renaming local and remote PlugLinkAV devices.
Details on how to set or change the network password for enhanced security.
Explains how to reset to factory defaults or update the adapter's firmware.
Describes configuring Quality of Service settings for traffic prioritization.
How to access and interpret network packet transmission statistics.
Information on checking Ethernet and HomePlug connection status.
Guides on adjusting thresholds for the device's LED status lights.
How to refresh the Power Manager's view of network devices.
Instructions for resetting the device using physical buttons.
Details the status lights and ports on the front of the device.
Identifies the RJ-45 Ethernet port on the bottom of the device.
Explains the function of physical buttons and setting up network security.
Outlines FCC compliance statements and operating conditions for the device.
To Next Page
