Need help?Do you have a question about the Aspar EVO-15 and is the answer not in the manual?
General| Brand | Aspar |
|---|---|
| Model | EVO-15 |
| Category | Lighting Equipment |
| Language | English |
Details connecting the DC motor, including wire colors and sensor connections.
Explains connecting external buttons for cover control with two or three button options.
Describes connecting an external radio receiver if internal module range is insufficient.
Explains the use of an auxiliary relay for switching and breaking contacts.
Describes connecting a level sensor to prevent damage from low water levels.
Advises against placing electronics in inaccessible or humid environments.
Explains the function of the four buttons on the EVO-15 for operation and menu navigation.
Guides through language, position teaching, and RC learning in the user menu.
Details access to advanced settings via the technician menu using a code.
Lists and explains specific error codes displayed by the device for troubleshooting.
Describes a specific error condition and its resolution.
Explains LED functions for cover status and device error indications.
Step-by-step guide to setting closed and open end positions for the cover.
Instructions for pairing remote controls with the EVO-13 unit.
Configuration of engine type and button operation modes.
Detailed wiring diagram for connecting the motor and sensor.
Wiring diagram for the variant with two external buttons.
Wiring diagram for the variant with three external buttons.
Wiring diagram showing the connection of a water level switch.
Wiring diagram for connecting an external antenna.
Wiring diagram for the auxiliary relay output.
To Next Page