Operation
WARNING
Failure to follow the below precaution could result in electrical shock, fire or personal injury.
1 The plug must be plugged into an outlet that is properly installed and grounded.
2 Do not use an extension cord or plug adaptor with this unit.
Before starting the unit
1. Select a suitable location, make sure the unit is near to an electrical outlet.
2. Install the flexible exhaust hose and the adjustable window slider kit.
3. Plug the unit into the correct outlet.
4. Turn the unit on.
Heating operation mode (Cooling only model has no heating function)
1. Press the MODE button in sequence until the heat display is illuminated.
2. Press the “+”and “-”button to set your desired temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
Cooling operation mode
1. Press the MODE button in sequence until cool is illuminated.
2. Press the “+”and “-”button to set your desired temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
Dehumidify operation mode
1. Press the MODE button in sequence until the dry display is illuminated.
2. The fan will run at a fixed speed at this operation mode.
3. Close windows and doors for the best dehumidifying effect.
4. Press ON/OFF button to start the unit and press it again to stop.
Circulation operation mode
1. Press MODE button in sequence until the fan display is illuminated.
2. Press the FAN button to select the fan speed.
3. Press the ON/OFF button to start the unit and press it again to stop.
Timer operation
1. Press the TIMER button.
2. Press the “+” and “-”button to adjust your timer time.
Note: “Time off” is effective only when the air-conditioner is running.
“Time on” is effective only when the air-conditioner is stopped.
AC Portable Unit Manual AW 2015 A5.indd 9 03/03/2015 16:14
To Next Page
Loading...
Need help?
General
