EN - 9
in programs involving Purebeam+ drying technology.
• Electronic and magnetic devices (credit cards,
etc.) should not be put into the machine in programs
involving Purebeam+ Refresh program.
• Damage to the UV-C LED may result in the emission
of hazardous UV-C radiation. For this reason, do not
operate the damaged product and call the technical
service center.
• Call the technical service center for replacement of
the parts related with UV-C LED.
• You must not change the UV-C LED and related
parts by yourself. Make sure that the machine is
unplugged while waiting for the technical service
personnel.
• UV-C LED should not be disposed of with household
waste.
• Children should be kept away while programs
involving Purebeam+ technology are active.
• No attempt should be made to disinfect living beings
in Purebeam+ Drying programs.
• No attempt should be made to disinfect human skin
in Purebeam+ Drying programs.
items, packaged and open food, products that contact
with food, electronic devices (tablet, phone, computer,
etc.), magnetic devices (credit card, public transport
card, etc.) in Purebeam+ programs.
• Make sure that the items to be cleaned in the
To Next Page
Loading...
