EN - 19
5.1.4. Auxiliary Functions
The table that summarises the options that can be selected in programmes is given below.
Option Description
Drying Level
The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other
than the standard setting: 1, 2, 3. After selection, the LED of the relevant drying
level will turn on.
Delicate Drying Delicate fabrics are dried for a longer time at a low temperature.
UVC
UVC Technology with the inspiration of the sun rays, ensures that your clothes
and machine remain at the maximum hygiene level during the initial drying and
ventilation processes.
Delay Start
You can delay the start time of the programme by selecting the 1-hour to 23-hour
option. You can activate the desired delay time by pressing the Start/Pause button.
When the time is up, the selected programme will start automatically. During the
delay time, options compatible with the programme can be activated/deactivated.
Long pressing on Delayed Start button changes delay time continuously.
Buzzer Cancel
The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel the warnings, press
and hold the "Delicate Option" button for 3 seconds. When you press the button,
you will hear an audible warning that the option has been cancelled.
Time Drying
When knob is positioned to Time Drying programme, option can be selected by
pressing Time Drying option button and program starts by pressing Start/Pause
button. Long pressing on tme dyring button changes time continuously.
Child Lock
are pressed during the programme. To activate child lock feature user should
press “Delicate” and “UVC” buttons simultaneously for 3 sec. When the child lock
activated, all keys will be deactivated.Child lock is not automatically deactivated
at the end of the program. To deactivate the child lock at end of the programme,
press “Delicate” and “UVC” buttons simultaneously for 3 sec. When activating/
deactivating the child lock, “CL” will visualize on display for 2 sec and then
running or the child lock is active, if you turn the programme selection knob, you
will hear an audible warning and “CL” will visualize on display for 2 sec and then
warning. Even if you set the programme knob to another programme, the previous
programme will continue running. To select a new programme, you need to
deactivate the child lock and then set the programme selection knob.
To Next Page
Loading...
