Dust Cup
Metal Tube
Motorized
Brush Lock
Motorized Brush
Metal Tube Lock
Power ON/OFF
Dust Cup Release Button
Long Crevice
Nozzle
Hanger
3-In-1 Nozzle
Charging Port
Speed Button
Battery Indicator
Using Motorized Brush
Using Long Crevice Nozzle & 3-In-1 Nozzle
USING YOUR VACUUM CLEANER
Note:
· Charge the battery before first use and at least once every three months.
· Do not allow the battery to be fully discharged.
· Press the Metal Tube Lock on the Dust Cup assembly, then remove the Metal Tube.
· Insert Long Crevice Nozzle or 3-In-1 Nozzle into the Dust Cup assembly completely.
Insert the Metal Tube into the Dust Cup assembly until the lock clicks into place. Then, insert
Motorized Brush into the Metal Tube until the lock clicks into place.
1 2
Operation
1. Press to start the vacuum in low speed mode.
2. Press to turn off the appliance.
3. Press to switch to high speed mode.
＋/－
KNOWING YOUR VACUUM CLEANER
03 04
To Next Page
Loading...
