ASROCK Rack ALTRAD8UD-1L2T - Page 71

ALTRAD8UD-1L
ALTRAD8UD-1L2T
64 65
English
When [DHCP] or [Static] is selected, do NOT modify the BMC network settings on the
IPMI web page.
e default login information for the IPMI web interface is:
Username: admin
Password: admin
For more instructions on how to set up remote control environment and use the IPMI man-
agement platform, please refer to the IPMI Conguration User Guide or go to the Support
website at: http://www.asrockrack.com/support/ipmi.asp
VLAN
Enable or disable Virtual Local Area Network.
If [Enabled] is selected, congure the items below.
VLAN ID: Select this item to congure the VLAN ID setting, the Maximum value is 4094
and the Minimum value is 1.
VLAN Priority: Select this item to congure the VLAN Priotity setting. the Maximum
value is 7 and the Minimum value is 0.
IPV6 Support
Enable or Disable LAN1 IPV6 Support.
Manual Setting IPMI LAN (IPV6)
Select to congure LAN channel parameters statically or dynamucally (by BIOS or BMC).
Unspecied option will not modify any BMC network parameters during BIOS phase.