2020
2020
20
20-Pin ATX Power Supply Installation
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
12
1
24
13
CPU Fan Connector Please connect the CPU fan
(4-pin CPU_FAN1) cable to this connector and
(see p.10 No. 5) match the black wire to the
ground pin.
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
3-Pin Fan Installation
Pin 1-3 Connected
+5 V
DUMMY
DUMMY
SPEAKER
1
GND
PWRBTN#
PLED -
PLED +
DUMMY
RESET#
GND
HD LED+
HD LED -
1
System Panel Header This header accommodates
(9-pin PANEL1) several system front panel
(see p.10 No. 22) functions.
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1) speaker to this header.
(see p.10 No. 19)
4
3
2
1
GND
+12V
CPU_FAN_SPEED
FAN_SPEED _CONTROL
Chassis and Power Fan Connectors Please connect the fan cables
(3-pin CHA_FAN1) to the fan connectors and
(see p.10 No. 16) match the black wire to the
ground pin.
(3-pin PWR_FAN1)
(see p.10 No. 35)
GND
+12V
CHA_FAN_SPEED
GND
+12V
PWR_FAN_SPEED
ATX Power Connector Please connect an ATX power
(24-pin ATXPWR1) supply to this connector.
(see p.10 No. 8)
12
1
24
13
To Next Page
Loading...
