ASROCK 970 Pro - Page 33

3333
3333
33
TRRD
Use this to adjust TRRD values. Configuration options: [Auto], [4CLK] to
[7CLK]. The default value is [Auto].
TWTR
Use this to adjust TWTR values. Configuration options: [Auto], [4CLK] to
[7CLK]. The default value is [Auto].
TWR
Use this to adjust TWR values. Configuration options: [Auto], [5CLK] to
[12CLK]. The default value is [Auto].
TRC
Use this to adjust TRC values. Configuration options: [Auto], [11CLK] to
[42CLK]. The default value is [Auto].
TRWTWB
Use this to adjust TRWTWB values. Configuration options: [Auto], [3CLK] to
[18CLK]. The default value is [Auto].
TRWTTO
Use this to adjust TRWTTD values. Configuration options: [Auto], [3CLK] to
[17CLK]. The default value is [Auto].
TWRRD
Use this to adjust TWRRD values. Configuration options: [Auto], [2CLK] to
[10CLK]. The default value is [Auto].
TWRWR
Use this to adjust TWRWR values. Configuration options: [Auto], [2CLK] to
[10CLK]. The default value is [Auto].
TRDRD
Use this to adjust TRWTTD values. Configuration options: [Auto], [3CLK] to
[10CLK]. The default value is [Auto].
TRFC0
Use this to adjust TRFC0 values. Configuration options: [Auto], [90ns],
[110ns], [160ns], [300ns] and [350ns]. The default value is [Auto].
TRFC1
Use this to adjust TRFC1 values. Configuration options: [Auto], [90ns],
[110ns], [160ns], [300ns] and [350ns]. The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
CHA ADDR/CMD Delay
Use this to adjust values for CHA ADDR/CMD Delay feature. Configuration
options: [Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is
[Auto].