Do you have a question about the ASROCK 970 Pro3 and is the answer not in the manual?
Non-ECC | Yes |
---|---|
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 800, 1066, 1333, 1600, 1800, 1866 MHz |
System bus rate | 4.8 GT/s |
Processor socket | Socket AM3+ |
Processor manufacturer | AMD |
Compatible processor series | AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6 |
Maximum number of SMP processors | 1 |
Processor system buses supported | 2400 MHz |
USB 2.0 connectors | 3 |
Number of SATA III connectors | 6 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Certification | FCC, CE, WHQL |
Component for | PC |
Motherboard chipset | AMD 970 |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
Motherboard southbridge | AMD SB950 |
RAID levels | 0, 1, 5, 10 |
Supported storage drive interfaces | SATA III |
On-board graphics card | No |
Parallel processing technology support | Not supported |
PCI Express slots version | 2.0 |
Cables included | SATA |
LAN controller | Realtek RTL8111E |
Networking features | Gigabit Ethernet |
BIOS type | AMI |
ACPI version | 1.1 |
BIOS memory size | 32 Mbit |
Depth | 208 mm |
---|---|
Width | 305 mm |
Details the technical specifications of the motherboard, including CPU, memory, and expansion slots.
Essential safety guidelines and precautions to follow before installing hardware components.
Steps for SATA3 HDD setup, RAID, drivers, and Windows OS installation.
Comprehensive settings for CPU, chipset, storage, I/O, ACPI, and USB configurations.
Step-by-step guide for installing Windows OS on large HDDs (>2TB) in AHCI mode.
Instructions for installing Windows OS on large HDDs (>2TB) in RAID mode using UEFI BIOS.