EasyManuals Logo

ASROCK AD2500B-ITX Quick Installation Guide

ASROCK AD2500B-ITX
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
ASRock AD2700B-ITX / AD2500B-ITX Motherboard
English
8. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause instability of the system or damage the CPU.
9. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the moth-
erboard functions properly and unplug the power cord, then plug it back
again. To improve heat dissipation, remember to spray thermal grease
between the CPU and the heatsink when you install the PC system.
10. EuP stands for Energy Using Product, was a provision regulated by the
European Union to de ne the power consumption for the completed sys-
tem. According to EuP, the total AC power of the completed system
should be under 1.00W in off mode condition. To meet EuP standards,
an EuP ready motherboard and an EuP ready power supply are required.
According to Intel’s suggestion, the EuP ready power supply must meet
the standard of 5v, and the standby power ef ciency should be higher
than 50% under 100 mA current consumption. For EuP ready power sup-
ply selection, we recommend you to check with the power supply manu-
facturer for more details.

Other manuals for ASROCK AD2500B-ITX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK AD2500B-ITX and is the answer not in the manual?

ASROCK AD2500B-ITX Specifications

General IconGeneral
BrandASROCK
ModelAD2500B-ITX
CategoryMotherboard
LanguageEnglish

Related product manuals