Need help?Do you have a question about the ASROCK AD2550B-ITX and is the answer not in the manual?
Provides detailed technical specifications of the motherboard's platform, CPU, memory, graphics, LAN, and connectors.
Diagram illustrating the physical arrangement of onboard components and connectors.
Step-by-step guide for installing DDR3 SO-DIMM memory modules into the motherboard slots.
Steps to install SATA/SATAII hard disks for internal storage devices.
Explanation of the Hot Plug feature for SATA/SATAII HDDs in AHCI mode.
Detailed guide on the operation and precautions for SATA/SATAII HDD Hot Plug feature.
Configuration settings for CPU, Chipset, Storage, Super IO, ACPI, USB, and Voltage.
Settings for Intel Hyper Threading Technology and No-Excute Memory Protection.
Configuration options for ACPI HPET Table, Restore on AC/Power Loss, Onboard HD Audio, Front Panel, Onboard LAN, and Good Night LED.
Setting for SATA2 mode, including IDE Mode, AHCI Mode, and Disabled options.
General| Form Factor | Mini-ITX |
|---|---|
| Memory Slots | 2 x DDR3 SO-DIMM |
| Max Memory | 4GB |
| Audio | Realtek ALC662 |
| Chipset | Intel NM10 |
| Memory Type | DDR3 |
| Graphics | Intel GMA 3650 (Integrated) |
| Expansion Slots | 1 x PCIe 2.0 x1 |
| Storage | 2 x SATA2 3.0 Gb/s |
| LAN | Realtek RTL8111E |
| Video Outputs | 1 x HDMI, 1 x D-Sub |
| Rear Panel I/O | 1 x HDMI Port, 4 x USB 2.0 Ports, 1 x RJ-45 LAN Port |
| Internal I/O Connectors | 1 x Front Panel Audio connector |
| Power Connector | 1 x 24-pin ATX power connector |
To Next Page
