ASROCK B365 Pro4 User Manual

Version 1.0
Published January 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com

ASROCK B365 Pro4 Specifications

General

Processor socket	LGA 1151 (Socket H4)
Processor manufacturer	Intel
Compatible processor series	-
Maximum internal memory supported by processor	128 GB
Audio chip	Realtek ALC892
Cooling type	Passive
Certification	FCC, CE, ErP/EuP
Component for	PC
Motherboard chipset	Intel B365
Audio output channels	7.1 channels
Motherboard form factor	ATX
Windows operating systems supported	Windows 10 x64
ECC	Yes
Memory channels	Dual-channel
Memory slots type	DIMM
Number of memory slots	4
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Supported memory clock speeds	2133, 2400, 2666 MHz
RAID levels	0, 1, 5, 10
Supported storage drive types	SSD
Supported storage drive interfaces	SATA III, Ultra M.2
PCI Express x1 (Gen 3.x) slots	2
Graphics card	UHD Graphics
DirectX version	12.0
Parallel processing technology support	CrossFireX, Quad-GPU CrossFireX
Number of SATA III connectors	6
USB 3.2 Gen 1 (3.1 Gen 1) connectors	1
BIOS type	UEFI AMI
ACPI version	6.0
BIOS memory size	128 Mbit
System Management BIOS (SMBIOS) version	2.7
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	5
Wi-Fi	No
LAN controller	Intel® I219-V
Ethernet interface type	Gigabit Ethernet
Cables included	SATA
Harmonized System (HS) code	84733020

Weight and Dimensions

Depth	305 mm
Width	229 mm

Summary

Motherboard Layout

I/O Panel

Chapter 1 Introduction

1.1 Package Contents

Lists all items included in the motherboard package, such as cables and manuals.

1.2 Specifications

Details the technical specifications of the motherboard, including CPU, memory, and expansion slots.

Chapter 2 Installation

Pre-installation Precautions

Outlines essential safety measures and handling guidelines before installing motherboard components.

2.1 Installing the CPU

Provides step-by-step instructions and visual guides for safely installing the CPU into the socket.

2.2 Installing the CPU Fan and Heatsink

Guides users through the process of mounting the CPU cooler and fan securely onto the motherboard.

2.3 Installing Memory Modules (DIMM)

Explains how to install DDR4 memory modules into the DIMM slots for optimal performance.

2.4 Expansion Slots (PCI Express Slots)

Details the types and configurations of PCI Express slots available for expansion cards.

2.5 Jumpers Setup

Describes the function and proper use of jumpers, such as the Clear CMOS jumper.

2.6 Onboard Headers and Connectors

Identifies and explains the purpose of various onboard headers and connectors on the motherboard.

2.7 M.2 WiFi/BT Module Installation Guide

Provides instructions for installing M.2 WiFi and Bluetooth modules onto the motherboard.

2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1)

Guides users through the installation process for M.2 SATA or PCIe SSD modules in the M2_1 slot.

2.9 M.2_SSD (NGFF) Module Installation Guide (M2_2)

Details the installation steps for M.2 SATA or PCIe SSD modules in the M2_2 slot.

2.10 ASRock Polychrome RGB

Explains how to use the ASRock Polychrome RGB utility to customize motherboard lighting effects.

Contact Information

DECLARATION OF CONFORMITY

EU Declaration of Conformity