English
34
SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.7, No. 13)
is connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certicates, pass-
words, and data. A TPM system
also helps enhance network
security, protects digital
identities, and ensures platform
integrity.
RGB LED Headers
(4-pin RGB_LED1)
(see p.7, No. 30)
(4-pin RGB_LED2)
(see p.7, No. 9)
ese two RGB headers are used
to connect RGB LED extension
cable which allows
users to choose from various LED
lighting eects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 59 for
further instructions on these two
headers.
Addressable LED Headers
(3-pin ADDR _LED1)
(see p.7, No. 29)
(3-pin ADDR _LED2)
(see p.7, No. 8)
ese two
Addressable
headers
are used to connect
Addressable
LED extension cable which
allows users to choose from
various LED lighting eects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 60 for
further instructions on this
header.
VOUT
DO_ADDR
GN
DO_ADDR
D
+12V GR B
G
R
B
+3.3V
SPI_DQ2
SPI_CS0
Dummy
CLK
SPI_MISO
SPI_MOSI
GND
SPI_TPM_CS
RST#
RSMRST#
TPM_PIRQ