ASROCK B550M PG Riptide - Page 71

English
65
B550M PG Riptide
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign
the appropriate frequency automatically. Setting DRAM Frequency can adjust DRAM
Timing.
DRAM Voltage
Congure the voltage for the DRAM Voltage.
Innity Fabric Frequency and Dividers
AMD Overclocking Setup Set Innity Fabric frequency (FCLK). Auto: FCLK = MCLK.
Manual: FCLK must be less than or equal to MCLK for best performance in most cases.
Latency penalties are incurred if FCLK and MCLK are mismatched, but suciently high
MCLK can negate or overcome this penalty.
DRAM Timing Conguration
External Voltage Settings and Load-line Calibration
Voltage Mode
[OC]
If this option is selected, there is larger range voltage for overclocking.
[Normal]
If this option is selected, there is smaller range voltage for normal system.
CPU Vcore Voltage
Input voltage for the processor by the external voltage refulator.
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the system is under
heavy loading.
VDDCR_SOC Voltage
Congure the voltage for the VID-requested VDDCR_SOC supply level.
VDDCR_SOC Load-Line Calibration
VDDCR_SOC Load-Line Calibration helps prevent VDDCR_SOC voltage droop when the
system is under heavy loading.
VPPM
Congure the voltage for the VPPM.