ASROCK B650M - Page 54

English
49
B650M-H/M.2+
Step 3
Move the stando based on the
module type and length.
e stando is placed at the nut
location B by default. Skip Step 3
and 4 and go straight to Step 5 if you
are going to use the default nut.
Step 4
Peel o the yellow protective lm on
the nut to be used. Hand tighten the
stando into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2 SSD
module into the M.2 slot. Please
be aware that the M.2 SSD module
only ts in one orientation.
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw
as this might damage the module.
AB
20
o
AB
For the latest updates of M.2 SSD module support list, please visit our website for details:
http://www.asrock.com
NUT1NUT2B