ASROCK B660-ITX - Page 41

36 37
English
CPU Conguration
CPU P-Core Ratio
e CPU speed is determined by the CPU P-Core Ratio multiplied with the BCLK.
Increasing the CPU P-Core Ratio will increase the internal CPU clock speed
without aecting the clock speed of other components.
AVX2 Ratio Oset
AVX2 Ratio Oset species a negative oset from the CPU Ratio for AVX
workloads. AVX is a more stressful workload that lower the AVX ratio to ensure
maximum possible ratio for SSE workloads.
CPU E-Core Ratio
e E-Core speed is determined by the E-Core Ratio multiplied with the BCLK.
Increasing the E-Core Ratio will increase the internal E-Core clock speed without
aecting the clock speed of other components.
CPU Cache Ratio
e CPU Internal Bus Speed Ratio. e maximum should be the same as the CPU
Ratio.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. is is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode
Select the performance state that the BIOS will set before OS hando.
Ring to Core Ratio Oset
Disable Ring to Core Ratio Oset so the ring and core can run at the same fre-
quency.
SA PLL Frequency Override
Congure SA PLL Frequency.
BCLK TSC HW Fixup
BCLK TSC HW Fixup disable during TSC copy from PMA to APIC.
FLL Overclock Mode
Nominal is good for normal core ratio overclocking. Elevated and Extremely
El¬evated are good for high BCLK OC.