ASROCK B660-ITX - Page 51

46 47
English
+0.82V PCH Voltage
Congure the chipset voltage (0.82V).
+1.05V PCH Voltage
Congure the chipset voltage (1.05V).
AVX Conguration
AVX2 Voltage Guardband Scale Factor
AVX2 Voltage Guardband Scale Factor controls the voltage guardband applied to
AVX2 workloads. A value > 1.00 will increase the voltage guardband, and < 1.00
will decrease the voltage guardband.
FIVR Conguration
P-Core Voltage Mode
Selects between Adaptive and Override Voltage modes. In Override Mode, the
voltage selected will be applied over all operating frequencies. In Adaptive mode,
the voltage is interpolated only in turbo mode.
Extra Turbo Voltage
Species the extra turbo voltage applied while the IA Core is operating in turbo
mode.
VF Oset Mode
Selects between Legacy and Selection modes. Need Reset System aer enabling
OverClocking Feature to initialize the default value. In Legacy Mode, setting a
global oset for the entire VF curve. In Selection modes, setting a selected VF point.
VF Conguration Scope
Allows all cores VF curve or per-core VF curve conguration.
Core Voltage Oset
Species the oset voltage applied to the IA Core domain. is voltage is specied
in millivolts.
Oset Prex
Sets the oset value as positive or negative.
E-Core L2 Voltage Mode
Selects between adaptive and Override Voltage modes. In Override Mode the