Need help?Do you have a question about the ASROCK B760 Pro RS/D4 and is the answer not in the manual?
General| Processor socket | LGA 1700 |
|---|---|
| Processor manufacturer | Intel |
| Compatible processor series | Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9 |
| Maximum number of SMP processors | 1 |
| Audio chip | Realtek ALC897 |
| Certification | - FCC, CE - ErP/EuP ready (ErP/EuP ready power supply is required) |
| Component for | PC |
| Motherboard chipset | Intel B760 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Compatible operating systems | Microsoft® Windows® 10 64-bit / 11 64-bit |
| Non-ECC | Yes |
| Memory channels | Dual-channel |
| Memory slots type | DIMM |
| Number of memory slots | 4 |
| Supported memory types | DDR4-SDRAM |
| Maximum internal memory | 128 GB |
| Supported memory clock speeds | 3200, 4000, 4266, 4400, 5333 MHz |
| BIOS type | UEFI AMI |
| BIOS memory size | 128 Mbit |
| Parallel processing technology support | Not supported |
| Wi-Fi | No |
| LAN controller | Realtek RTL8125-BG |
| Ethernet interface type | 2.5 Gigabit Ethernet |
| PCI Express x16 (Gen 4.x) slots | 2 |
| RAID levels | 0, 1, 5, 10 |
| Supported storage drive types | HDD & SSD |
| Supported storage drive interfaces | M.2, SATA III |
| DisplayPort version | 1.4 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 5 |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity | 0 |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 305 mm |
Introduces the motherboard and lists included package items.
Detailed hardware specifications of the motherboard.
Visual guide to component placement and rear connectivity ports.
Essential safety and handling guidelines for component installation.
Steps for installing the CPU and its cooling solution.
Instructions for installing DIMM modules.
Procedure for installing SATA and M.2 SSD drives.
Installing graphics cards and understanding PCIe slot usage.
Connecting power supply, front panel components, and internal headers.
Configuration of jumpers and explanation of system panel headers.
Instructions for installing M.2 WiFi/BT and SSD modules.
Details on RGB/Addressable LED, TPM, and Thunderbolt headers.
Explanation of diagnostic LEDs for system boot status.
Information on certifications and compliance standards.
Terms and conditions for using included software.
Important warnings, battery information, and regional notices.
To Next Page